Automated quantification of fluorescence and morphological changes in pretreated wood cells by fluorescence macroscopy.

BACKGROUND: Lignocellulosic biomass is a complex network of polysaccharides and lignin that requires a pretreatment step to overcome recalcitrance and optimize valorisation into biobased products. Pretreatment of biomass induces chemical and morphological changes. Quantification of these changes is critical to understand biomass recalcitrance and to predict lignocellulose reactivity. In this study, we propose an automated method for the quantification of chemical and morphological parameters through fluorescence macroscopy, which was applied on wood samples (spruce, beechwood) pretreated with steam explosion. RESULTS: Results in fluorescence macroscopy highlighted the impact of steam explosion on spruce and beechwood: fluorescence intensity of samples was highly altered, especially for the most severe conditions. Morphological changes were also revealed: shrinkage of cells and deformation of cell walls manifested as the loss of rectangularity or circular shape, for tracheids in spruce and vessels in beechwood respectively. Quantification of fluorescence intensity of cell walls and quantification of morphological parameters related to cell lumens were carried out accurately by applying the automated method onto the macroscopic images. The results showed that lumens area and circularity could be considered as complementary markers of cell deformation, and that fluorescence intensity of the cell walls could be related to morphological changes and to the conditions of pretreatment. CONCLUSIONS: The developed procedure allows simultaneous and effective quantification of morphological parameters and fluorescence intensity of the cell walls. This approach can be applied to fluorescence macroscopy as well as other imaging techniques and provides encouraging results towards the understanding of biomass architecture.

Real-time imaging of enzymatic degradation of pretreated maize internodes reveals different cell types have different profiles.

This work presents a dynamic view of the enzymatic degradation of maize cell walls, and sheds new light on the recalcitrance of hot water pretreated maize stem internodes. Infra-red microspectrometry, mass spectrometry, fluorescence recovery after photobleaching and fluorescence imaging were combined to investigate enzymatic hydrolysis at the cell scale. Depending on their polymer composition and organisation, cell types exhibits different extent and rate of enzymatic degradation. Enzymes act sequentially from the cell walls rich in accessible cellulose to the most recalcitrant cells. This phenomenon can be linked to the heterogeneous distribution of enzymes in the liquid medium and the adsorption/desorption mechanisms that differ with the type of cell.

Measuring Interactions between Fluorescent Probes and Lignin in Plant Sections by sFLIM Based on Native Autofluorescence.

In lignocellulosic biomass (LB), the activity of enzymes is limited by the appearance of non-specific interactions with lignin during the hydrolysis process, which maintains enzymes far from their substrate. Characterization of these complex interactions is thus a challenge in complex substrates such as LB. The method here measures molecular interactions between fluorophore-tagged molecules and native autofluorescent lignin, to be revealed by Förster resonance energy transfer (FRET). Contrary to FRET measurements in living cells using two exogenous fluorophores, FRET measurements in plants using lignin is not trivial due to its complex autofluorescence. We have developed an original acquisition and analysis pipeline with correlated observation of two complementary properties of fluorescence: fluorescence emission and lifetime. sFLIM (spectral and fluorescent lifetime imaging microscopy) provides the quantification of these interactions with high sensitivity, revealing different interaction levels between biomolecules and lignin.

Multimodal analysis of pretreated biomass species highlights generic markers of lignocellulose recalcitrance.

BACKGROUND: Biomass recalcitrance to enzymatic hydrolysis has been assigned to several structural and chemical factors. However, their relative importance remains challenging to evaluate. Three representative biomass species (wheat straw, poplar and miscanthus) were submitted to four standard pretreatments (dilute acid, hot water, ionic liquid and sodium chlorite) in order to generate a set of contrasted samples. A large array of techniques, including wet chemistry analysis, porosity measurements using NMR spectroscopy, electron and fluorescence microscopy, were used in order to determine possible generic factors of biomass recalcitrance. RESULTS: The pretreatment conditions selected allowed obtaining samples displaying different susceptibility to enzymatic hydrolysis (from 3 up to 98% of the initial glucose content released after 96 h of saccharification). Generic correlation coefficients were calculated between the measured chemical and structural features and the final saccharification rates. Increases in porosity displayed overall strong positive correlations with saccharification efficiency, but different porosity ranges were concerned depending on the considered biomass. Lignin-related factors displayed highly negative coefficients for all biomasses. Lignin content, which is likely involved in the correlations observed for porosity, was less detrimental to enzymatic hydrolysis than lignin composition. Lignin influence was highlighted by the strong negative correlation with fluorescence intensity which mainly originates from monolignols in mature tissues. CONCLUSIONS: Our results provide a better understanding of the factors responsible for biomass recalcitrance that can reasonably be considered as generic. The correlations with specific porosity ranges are biomass species-dependent, meaning that enzymes cocktails with fitted enzyme size are likely to be needed to optimise saccharification depending on the biomass origin. Lignin composition, which probably influences its structure, is the most important parameter to overcome to enhance enzymes access to the polysaccharides. Accordingly, fluorescence intensity was found to be a rapid and simple method to assess recalcitrance after pretreatment.

Fluorescent Nano-Probes to Image Plant Cell Walls by Super-Resolution STED Microscopy.

Lignocellulosic biomass is a complex network of polymers making up the cell walls of plants. It represents a feedstock of sustainable resources to be converted into fuels, chemicals, and materials. Because of its complex architecture, lignocellulose is a recalcitrant material that requires some pretreatments and several types of catalysts to be transformed efficiently. Gaining more knowledge in the architecture of plant cell walls is therefore important to understand and optimize transformation processes. For the first time, super-resolution imaging of poplar wood samples has been performed using the Stimulated Emission Depletion (STED) technique. In comparison to standard confocal images, STED reveals new details in cell wall structure, allowing the identification of secondary walls and middle lamella with fine details, while keeping open the possibility to perform topochemistry by the use of relevant fluorescent nano-probes. In particular, the deconvolution of STED images increases the signal-to-noise ratio so that images become very well defined. The obtained results show that the STED super-resolution technique can be easily implemented by using cheap commercial fluorescent rhodamine-PEG nano-probes which outline the architecture of plant cell walls due to their interaction with lignin. Moreover, the sample preparation only requires easily-prepared plant sections of a few tens of micrometers, in addition to an easily-implemented post-treatment of images. Overall, the STED super-resolution technique in combination with a variety of nano-probes can provide a new vision of plant cell wall imaging by filling in the gap between classical photon microscopy and electron microscopy.

Action of lytic polysaccharide monooxygenase on plant tissue is governed by cellular type.

Lignocellulosic biomass bioconversion is hampered by the structural and chemical complexity of the network created by cellulose, hemicellulose and lignin. Biological conversion of lignocellulose involves synergistic action of a large array of enzymes including the recently discovered lytic polysaccharide monooxygenases (LPMOs) that perform oxidative cleavage of cellulose. Using in situ imaging by synchrotron UV fluorescence, we have shown that the addition of AA9 LPMO (from Podospora anserina) to cellulases cocktail improves the progression of enzymes in delignified Miscanthus x giganteus as observed at tissular levels. In situ chemical monitoring of cell wall modifications performed by synchrotron infrared spectroscopy during enzymatic hydrolysis demonstrated that the boosting effect of the AA9 LPMO was dependent on the cellular type indicating contrasted recalcitrance levels in plant tissues. Our study provides a useful strategy for investigating enzyme dynamics and activity in plant cell wall to improve enzymatic cocktails aimed at expanding lignocelluloses biorefinery.

Changes in hemp secondary fiber production related to technical fiber variability revealed by light microscopy and attenuated total reflectance Fourier transform infrared spectroscopy.

Interest in hemp (Cannabis sativa L.) is increasing due to the development of a new range of industrial applications based on bast fibers. However the variability of bast fiber yield and quality represents an important barrier to further exploitation. Primary and secondary fiber content was examined in two commercial hemp varieties (Fedora 17, Santhica 27) grown under contrasted sowing density and irrigation conditions. Both growing conditions and hemp varieties impact stem tissue architecture with a large effect on the proportion of secondary fibers but not primary fibers. Attenuated total reflectance infrared spectroscopy allowed the discrimination of manually-isolated native primary fibers and secondary fibers but did not reveal any clustering according to growing conditions and variety. Infrared data were confirmed by wet chemistry analyses that revealed slight but significant differences between primary and secondary fiber cell wall composition. Infrared spectroscopy of technical fibers obtained after mechanical defibering revealed differences with native primary, but not secondary fibers and also discriminated samples obtained from plants grown under different conditions. Altogether the results suggested that the observed variability of hemp technical fibers could be partially explained by i) differences in secondary fiber production and ii) differential behavior during mechanical defibering resulting in unequal separation of primary and secondary fibers.

Exploring accessibility of pretreated poplar cell walls by measuring dynamics of fluorescent probes.

BACKGROUND: The lignocellulosic cell wall network is resistant to enzymatic degradation due to the complex chemical and structural features. Pretreatments are thus commonly used to overcome natural recalcitrance of lignocellulose. Characterization of their impact on architecture requires combinatory approaches. However, the accessibility of the lignocellulosic cell walls still needs further insights to provide relevant information. RESULTS: Poplar specimens were pretreated using different conditions. Chemical, spectral, microscopic and immunolabeling analysis revealed that poplar cell walls were more altered by sodium chlorite-acetic acid and hydrothermal pretreatments but weakly modified by soaking in aqueous ammonium. In order to evaluate the accessibility of the pretreated poplar samples, two fluorescent probes (rhodamine B-isothiocyanate-dextrans of 20 and 70 kDa) were selected, and their mobility was measured by using the fluorescence recovery after photobleaching (FRAP) technique in a full factorial experiment. The mobility of the probes was dependent on the pretreatment type, the cell wall localization (secondary cell wall and cell corner middle lamella) and the probe size. Overall, combinatory analysis of pretreated poplar samples showed that even the partial removal of hemicellulose contributed to facilitate the accessibility to the fluorescent probes. On the contrary, nearly complete removal of lignin was detrimental to accessibility due to the possible cellulose-hemicellulose collapse. CONCLUSIONS: Evaluation of plant cell wall accessibility through FRAP measurement brings further insights into the impact of physicochemical pretreatments on lignocellulosic samples in combination with chemical and histochemical analysis. This technique thus represents a relevant approach to better understand the effect of pretreatments on lignocellulose architecture, while considering different limitations as non-specific interactions and enzyme efficiency.

Evaluation of Lignocellulosic Biomass Degradation by Combining Mid- and Near-Infrared Spectra by the Outer Product and Selecting Discriminant Wavenumbers Using a Genetic Algorithm.

Mid-infrared (MIR) and near-infrared (NIR) spectroscopy provide useful information on the molecular composition of biological systems. Because they are sensitive to organic and mineral components, there is a growing interest in these techniques for the development of biomarkers that reflect intrinsic characteristics of plants and their mode of degradation. Due to their complexity and complementary nature, an important challenge is the combining of MIR and NIR information to identify discriminating wavenumbers in each wavenumber region, with the ultimate goal of assessing the biodegradation process of a lignocellulosic biomass at different time scales. This work investigates the potential of using the outer product to combine MIR and NIR spectra to highlight the connections between fundamental molecular vibrations and their combinations and bonds. Because this operation yields high-dimensional spectra, we propose to use a genetic algorithm to select the most discriminant wavenumbers within the degradation process. The results from two lignocellulosic biomasses with different biodegradation kinetics, miscanthus aerial parts and maize roots, confirm that the outer product combination of MIR and NIR spectral information allows a better discrimination of the biodegradation kinetic compared with the simple concatenation of MIR and NIR spectra or with the use of MIR or MIR spectral information separately. We show that the genetic algorithm selects wavenumbers that correspond to principal vibrations of chemical functional groups of compounds that undergo degradation/conversion during the biodegradation of the lignocellulosic biomass.

Structure and optical properties of plant cell wall bio-inspired materials: cellulose-lignin multilayer nanocomposites.

Interfacial affinity between lignin model compound (dehydrogenation polymer [DHP]) and cellulose nanocristals (CN) was studied before building a nanocomposite cellulose/lignin in multilayer form by spin-coating method. The adsorption isotherm of DHP was measured by ellipsometry at the liquid/CN film interface and showed that the surface concentration of adsorbed DHP increases with the bulk concentration in solution. The DHP appeared as globular structures on cellulosic film, as observed by AFM. Spreading a dense lignin layer on CN film gave rise to the disappearance of the InfraRed resonance bands related to the DHP aromatics. The film obtained from alternate layers of cellulose/DHP was transparent in visible light and had weak absorption in UV wavelengths. Optical properties measured in the visible wavelength range by ellipsometry and spectrophotometry indicated that beyond six bilayers (cellulose/DHP), the composite exhibits antireflexion properties.

Concomitant changes in viscoelastic properties and amorphous polymers during the hydrothermal treatment of hardwood and softwood.

The aim of this study was to understand how the molecular structures of amorphous polymers influence wood viscoelastic properties. Wood from oak and spruce was subjected to hydrothermal treatments at 110 or 135 degrees C. Wood rigidity, reflected by the wood storage modulus, showed different modification patterns according to the wood species or the temperature level. Because viscoelasticity is dependent on wood amorphous polymers, modifications of lignins and noncellulosic polysaccharides were examined. Hemicellulose degradation occurred only at 135 degrees C. In contrast, lignins displayed major structural alterations even at 110 degrees C. In oak lignins, the beta-O-4 bonds were extensively degraded and wood rigidity decreased dramatically during the first hours of treatment. Spruce lignins have a lower beta-O-4 content and, relative to oak, the wood rigidity decrease due to treatment was less pronounced. Wood rigidity was restored to its initial value by prolonged treatment, probably due to the formation of condensed bonds in cell wall polymers.